VIAIR 380C 200 PSI Chrome Compressor Kit | 38033

Viair "C" model compressors are intended to fill air tanks. They are not equipped with an on/off switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All "C" model viair compressors (except certain 90 & 100 series units) are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most Viair compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.

Features

• Permanent Magnetic Motor
• Stainless Steel Valves
• Moisture & Dust Resistant
• Stainless Steel 1/4" Leader Hose
• Insulated Wiring with Connections
• Mounting Plates with Vibration Isolators
• Intake Filter Assembly
• Voltage: 12V
• Max Amperage: 16 Amps
• Max Duty Cycle: 100% @ 100 PSI
• Max Working Pressure: 2000 PSI
• Length: 7.4 in (188 mm)
• Width: 3.94 in (100 mm)
• Height: 6.75 in (171.5 mm)
• Weight: 8 lbs (3.63 Kg)
• Installation Instructions

Kit Includes

• Check Valve
• Vibration Isolators
• Mounting Hardware
• Stainless Steel Braided Leader Hose
• Air Line for Remote Mount Air Filter
• Remote Mount Air Filter Assembly
• (2) Replacement Air Filter Elements
• Installation Instructions
• Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. lbs.