The Mini Maxx race tuner from H&S Performance features (4) power levels and combines high performance tuning with digital monitoring and shift-on-the-fly functionality for 2010-2012 6.7L Dodge Cummins applications.
Power Levels Pickup
Cab & Chassis
Shift on the Fly Power Levels
Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust)
Precisely tune engine with HP increases of 0-250HP
Approximate size: 3.5" x 2" (2" x 1.5" color screen)
Speedometer recalibration for use of non-stock size tires or gearing
Automatic safety backdown. Controlled by EGT, Boost, Trans. Temp, and Coolant Temp
Remove / Adjust top speed limiter
Allows removal of the entire EGR system including cooler with no trouble codes
Turn off EGR without removing ANY parts
Read / Clear Diagnostic Trouble Codes
Internet updateable w/included SD Memory Card and USB Cable
Digital gauges to monitor 20+ parameters
Power Levels Stock HP w/ stock exhaust
This option allows for the adjustment of the factory speed limiter. Most Cummins trucks have a 106 MPH speed limiter from the factory. The limiter can be adjusted from 50 MPH to 200 MPH. This option can only be adjusted during the Install Download process.
Tire Size Calibration
This option allows for the re-calibration of the factory speedometer to adjust for non-stock sized tires. For the most accurate speedometer reading when using non-stock sized tires, it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size. In addition, using a GPS is a great way to dial in your factory speedometer. Entering a larger tire size will cause the factory speedometer to read higher while entering a smaller tire size will cause the factory speedometer to read lower. The tire size can be adjusted from 25.5? to 45?. This option only takes a few seconds to change and can be adjusted at any time from the Tire Size Calibration menu.
Injection Timing (10-12 Models)
This option allows for the adjustment of the maximum allowed injection timing. There are 5 different settings for the Injection Timing:
1 ? Least Agressive (Stock Setting)
2 ? Less Agressive
3 ? (Default)
4 ? More Agressive
5 ? Most Agressive
Note: The injection timing adjustment will affect ALL power levels. This option can only be adjusted during the Install Download process.
Stationary Idle Adjust (10-12 Models)
The Stationary Idle Adjust Menu will allow you to adjust the idle speed of your vehicle while in Park or Neutral using your H&S tuning device. Choose the desired idle speed and select Set to set the idle speed to the chosen RPM. Idle speed can be adjusted from 700 RPM to 1500 RPM.
Torque Management (10-12 Models)
This option allows for the disabling of the vehicles torque management for those equipped with manual transmissions. This option increases pedal sensitivity and throttle response when REMOVED.
Special Functions 07.5-12 Models:
Your H&S tuning device has the capability of Enabling / Disabling factory vehicle features. These features can be found in the Special Functions Menu. These features can only be seen/changed after the Download is Installed to the vehicle. Below is a short description of each feature:?TPMS: Enable / Disable the Tire Pressure Monitoring System
Optical Chirp on Lock: Enable / Disable the parking lights flashing when locking the vehicle
Horn Chirp on Lock: Enable / Disable the horn chirp when locking the vehicle
Set Headlamp Delay: Enable / Disable the headlamp delay
Accessory Delay: Enable / Disable the shut-off delay of your radio and accessory system after the key has been turned off
Fog Lights W/High: Enable / Disable the fog lights staying on when high beams are being used
Daytime Lights: Enable / Disable the daytime running lights
Seat Belt Minder: Enable / Disable the chime for the drivers seat belt system. This feature will not disable the seat belt light
Current Power Level
Transmission Gear Position
Torque Converter Status
Injector Pulse Width
Intake Air Temperature
Fuel Rail Pressure (ICP)
Transmission Temperature (Auto)
Exhaust Back Pressure
H&S Mini Maxx Delete Tuner - 109003
Micro SD Card
OBD II Adapter
Mini USB Cable
WARNING! These products are capable of disabling emissions equipment. If using DPF/EGR removed tuning, these high performance products are intended SOLELY for offroad use or closed-course racing use.