No Hassle | Just Help
We Match All Legitimate Prices
Order by 2PM EST (Exclusions Apply)
We Know Diesel Trucks & Equipment
PPEI EFILive Emission Intact AutoCal by Kory Willis | 2010-2012 6.7L Cummins
The EFILive AutoCal from PPEI comes pre-tuned with 4 custom tunes for 2010-2012 6.7L Dodge Cummins applications.
- 4 power levels - up to +130hp
- Shift on the fly available
Description
PPEI EFILive AutoCal
This EFILive AutoCal features 4 pre-loaded dyno proven tunes from PPEI for 2010-2012 6.7L Cummins 2500/3500 applications.
68RFE Relearn Process
If your 2010+ Ram is equipped with the 68RFE automatic transmission, you must perform a re-learn procedure each time the ECM is flashed, even if you aren’t loading transmission tuning. Failure to do so will cause premature transmission failure. To perform the procedure after the ECM is flashed, drive the truck and apply no more than 30% throttle for at least 25-30 miles. It is important that the transmission shifts up and down as much as possible during this period. NOTE: The 25-30 miles is to re-establish the CVI values. It is common for these transmissions to take 400-500 miles or more to settle down. Sustained highway speeds should be avoided for the first 25-30 miles. If you purchased a tuned TCM for your 2007.5-2009 68RFE equipped Ram, you must perform the same relearn process upon installation of the TCM.
Due to the immense size of each of the tune files, and the limited memory space on the AutoCal itself, you will only have one tune on the AutoCal at a time. Because of this, in order to load a new tune into the truck, you will first have to change the tune in the AutoCal, and then load it into truck.
Included in autocal purchase: Written instructions, koozie (if available), and a sticker decal
Details
- PPEI-C10-EC
- PPEI-C10-EC
- PPEI Custom Tuning
- New
Shipping Information
- Item Requires Shipping
- 3.0 lbs.
- Free Shipping
May We Suggest
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 1-844-487-2787Mon-Fri 9am-6pm EST