RedHead 67-77 Chevy / GMC / Dodge Trucks & SUVs Steering Gear (3 Turn) | 2850-3T | 1967-1977 Chevy / GMC / Dodge Trucks & SUVs

Please Note: This steering gear has a threaded output shaft, which indirectly turns the tires, a nut and washer is used to connect it to the pitman arm. (Please see the second photo on your left, you will see the threaded output shaft)

If the steering gear output shaft has a notch in it, then you have a pinch bolt style holding your pitman arm to the steering gear, please click on the following link to view: 2851. (Please see the second photo, you will see the end of the output shaft has a notch in it)

Please Note: This Steering Gear is available in a 4 Turn option which is applicable if the vehicle is used for off-roading, has tires that are at least 37 inches in diameter, and more leverage is desired when steering.

Features:

• 12 Month Warranty
• Built in the USA
• Housings are machined out and replaced with needle bearings
• Shafts are flame sprayed or replaced as needed
• New control valves installed on some applications
• Worm and piston assembly are custom fit with special ordered, precise oversized ball bearings
• Sector shafts are installed on a lathe to confirm they are straight and true
• Sealing surface is polished to avoid any leaks

Core Return:

Please return core to: RedHead Steering Gears 4302 B ST NW AUBURN, WA 98001

• Please drain core of fluid and replace port plugs
• Use plastic bag that we sent your new gearbox in (if it’s still intact) or whatever is needed to keep box from leaking
• Re-use packing materials to ensure the box is returned to us without hassle from the courier
• Also, if possible, tape or re-tape the outside of the box to help strengthen it

Note:
If these steps aren’t properly performed, the gearbox may end up in hazmat and/or be returned to sender by courier.