Buy With Confidence
Fast & Easy Exchanges
No Hassle | Just Help
Price Match Guarantee
We Match All Legitimate Prices
Same Day FREE Shipping
Order by 2PM EST (Exclusions Apply)
In-House Experts
We Know Diesel Trucks & Equipment
Additional Images

Outlaw Diesel 6.7 Powerstroke CP4 Disaster Prevention Fuel Re-Route Kit | Metal Formed Lines | 2011-2019 Ford Powerstroke 6.7L

TW-DPK6.7

THe Only Kit with Hard Metal Formed Lines



The CP4 disaster prevention kit cannot prevent the CP4 pump from failing. What it does do is prevent the contamination from the failure from entering the high pressure fuel system.
Please Call for Availability
1-844-487-2787

Description

Outlaw Diesels CP4 Disaster Prevention Kit is a must have for any 6.7L Powerstroke owner. As many 6.7L Powerstroke owners have become painfully aware, the high pressure fuel pump (also known as a CP4 pump) has a design weakness; when the CP4 pump fails, it will shed tiny particles of metal throughout the entire high pressure fuel system. The only cure in this case is to replace everything in the high pressure fuel system - CP4 pump, fuel injectors, injection lines, fuel rails, etc.  This Disaster Prevention Kit will save you from that costly and catastrophic failure.

How it Works: 

The CP4 pump is internally lubricated by diesel fuel from the tank. After lubricating the crankcase area of the CP4 pump, fuel enters the high pressure pumping chambers and exits under pressure to the fuel rails and fuel injectors. The weakness of the CP4 pump lies in the crankcase area where a set of roller lifters ride on a camshaft. When the failure event occurs the lubricating fuel becomes contaminated immediately. Our bypass kit mounts to the CP4 pump and changes the routing of the fuel flow so that lubricating fuel from the crankcase is directed back to the fuel tank to be filtered before going through the fuel system again. Thus all fuel entering the pumping elements of the CP4 pump and leaving for the injectors is always routed through both of the vehicle's fuel filters to eliminate any change of contamination from a high pressure pump failure.

What's In The Box:

  • Fuel Separation Block
  • Pre-bent lines (One for 11-14, one for 15+)
  • Long Allen head screws (For fuel volume control solenoid)
  • Square cut and large O-Ring for fuel block to pump
  • Union to connect fuel supply line to pre-bent line
  • Extra fuel line O-Rings (Use factory O-Rings if not damaged)
  • O-Ring for bottom groove below fuel volume block to pump

Shipping Information

  • Item Requires Shipping
  • 5.0 lbs.
  • Free Shipping