Arterra 1000 watt Inverter

WFCO’s 1000 watt WF-5110R inverter delivers outstanding performance for multiple, lower power appliances. Featuring automatically resettable Reverse Polarity protection, the WF-5110R is protected from permanent damage should a battery be connected backwards. Once the battery connections are corrected, the unit will operate normally. The WF-5110R also has an exclusive internal transfer system which automatically allows the AC input to bypass the inverter when the inverter is connected to an AC power source.

Additionally, the WF-5110R provides high-efficiency power at full-load conditions with safeguards that include overload protection, over-temperature protection, and short-circuit protection. The cooling fan enhances efficiency as its operation is controlled by the amount of load incurred by the inverter. FCC Class B compliance, which means that the inverter is designed not to cause interference with televisions, radios, or other signals.

Specs:

• Output Waveform - Pure Sine Wave (THD <3%)
• Efficiency (full load) - >86%
• Continuous Output Power -1000 W
• Status Indicator Lights - Greed LED: AC Input Status, Red LED: Inverter Failure, Yellow LED: Battery Back Up Status
• Transfer Switch - 10 A, Automatic transfer to battery power
• Transfer Time - <50 milliseconds
• Protection Features - AC Output Fuse, GFCI, Over Temperature, Over/Under Input Voltage, Overload, Reverse Polarity (fuse), Short Circuit
• Cooling - Load Controlled Cooling Fan
• Output Wiring - Hard Wired
• Certifications - FCC Class B compliant
• Listed - UL 458
• Dimensions - 14.6″ L x 11″ W x 3.9″ H
• Weight - 11.5 lbs.
• Watts - 1KW
• Input Voltage/Hz - 120 VAC, 60 Hz
• VDC - 12
• Input Nominal Voltage - 12VDC
• Input Voltage Range - 10 – 15VDC
• AC Voltage Regulation - +/- 3% from no load to full load under battery range
• Remote Control Panel - Yes
• Overload Protection - Current limiting & shutdown
• Over Temperature - System shut down
• Output Power - Protected by fuse: 12A/125V Circuit Breaker
• Input Connection - 4AWG or 2AWG wires required with 100A in-line slow blow fuse
• Environmental - 0-40 degrees C / 20-90% non-condensing