MADS Smarty Power on Demand Programmer | 2003-2007 5.9L Dodge Cummins

The MADS Smarty Power on Demand Programmer for the 2003-2007 5.9L Dodge Cummins is geared toward the customer who is looking to add power that is safe and reliable for both the engine and the transmission and improve gas mileage. In fact, the main concern during the development of the performance software was to ensure the lowest EGT's and smoke levels possible.

Power Settings

• SW # 0 : Half power
• SW # 1 : 30 Hp increase, with added timing
• SW # 2 : 60 Hp increase, no added timing
• SW # 3 : 60 Hp increase, with added timing
• SW # 4 : 90 Hp increase, no added timing
• SW # 5 : 90 Hp increase, with added timing
• SW # 6 : 160 Hp increase, no added timing
• SW # 7 : 160 Hp increase, with added timing
• SW # 8 : 210 Hp increase, no added timing
• SW # 9 : 210 Hp increase, with added timing

Tested on stock trucks on a Mustang Dyno
Stock means just that. Stock! Even the air filters were stock...

The trucks were S T O C K, even the wastegate settings! We checked the "baseline" ( the stock truck Hp at the rear wheels ) twice in a day in order to be sure about our findings. The above declared HP numbers are all rounded down to the closest number. For example the 90 Hp file actually did 96 Hp. Thats a 90 Hp software for me, not a 100. The 170 Hp was 174.

Features

• CaTCHER softwares inside
• Ten different performance levels
• Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes about 3.5 to 5 minutes, depending on the truck model
• ABS tire height updates in just few seconds
• Not traceable in the stock setting. Smarty leaves no footprint
• Manual High Idle is enabled in all softwares
• Reads Diagnostic Trouble Codes in plain text
• No tools required, no fuses to pull
• USB built in for simple updates
• Most complete keyboard in the industry
• Reliable, it works off your OEM hardware
• Programmable Speed Limiter from 25 to 250 mph
• Power on Demand

Power on Demand
100 power levels selectable in just one second during the driving! Its easy: just type the preferred power level directly on Smarty keyboard, from 00 to 99. Thats all! For security reason, the truck waits that the throttle is released before applying the new power level.

No trace is left in the ECM!
I herby CLAIM that SmartyCR is the FIRST AND ONLY downloader that does not erase any of the stored data in the ECM. Smarty does NOT leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does NOT set ANY codes once the ECM is set back to stock. Smarty does NOT need to have fuses pulled.

ABS / Speedo recalibration
The tire height can be adjusted up to 44"" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.

DTC Code reader
The name says it all. You can read and erase codes. Codes are displayed also in plain English. That's old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too. (Smarty does erase ABS codes too but does not display them)

ECM update speed
Faster than anything else on the market! Again we've done our homework on the protocol. Less than5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.

We have developed our own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.