Hayes Brake Controllers Syncronizer Trailer Brake Controller - 1 to 2 Axles (Time Delayed) | 81725 | Universal Fitment

Economically priced brake controller automatically engages your trailer's brakes with a preset intensity when you apply the brakes in your vehicle. Power output is easily adjustable. Includes LED indicator and manual override.  The Synchronizer applies your trailer's brakes when the brake pedal in your tow vehicle is engaged. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Syncronizer. The controller then sends power out to your trailer brakes to activate them with an intensity you have set. The amount of braking power can be adjusted to suit your preference. To determine the amount of power that is best for your application, you must test out your towing setup and choose what feels best.  A time-delay controller is so named because there is a delay between the time that you initially apply the brakes in your tow vehicle and the time that the controller reaches the set maximum power output. Unlike a proportional brake controller, which activates your trailer's brakes based on the deceleration of your tow vehicle, the Syncronizer sends power out in the same way, with the same user-set delay, no matter the braking situation. The controller will continue to send out power to the trailer brakes as long as your foot is on the brake pedal, even when your truck and trailer have come to a stop.

Features: 

• Brake controller activates trailer brakes with preset intensity
• Signal is sent to trailer brakes when tow vehicle's brakes are activated
• Adjustable power output lets you determine the amount of power sent to the trailer's brakes
• Set to higher output when towing in hilly terrain or with a fully loaded trailer
• Back off power output when towing a lightweight or empty trailer
• Red LED indicator on front of unit illuminates when trailer's brakes are applied
• Light glows brighter as power output increases
• Built-in safeguards protect your vehicle and your trailer
• Manual override illuminates brake lights on tow vehicle and trailer
• Current limiter protects vehicle from shorts in the trailer wiring
• Hazard flasher immunity prevents pulsing of the brakes when flashers are activated
• Slide-bar manual override
• Dependable solid-state construction
• Quick and easy installation
• Can be mounted at any angle in any plane, and in any direction
• Mounting bracket and hardware included
• Plug-in, vehicle-specific brake control adapter (sold separately) can be used for certain applications to reduce installation time
• Made in the USA