- Home »
- Catalog »
- Construction / Agriculture Parts »
- Komatsu Construction & Agriculture »
- EGR Cooler | Komatsu
Dales Super Store » Bullet Proof Diesel
What is the origin of a Bullet Proof engine?
Back in 2008, we developed and installed the first solution to the chronic EGR cooler failures experienced on the 6.0L/VT365 platform. Shortly thereafter, we invented and patented our well-known oil cooler solution for the same engine. We knew that we needed a great name to represent our line of products, so we developed and trademarked Bullet Proof Diesel to denote and represent our brand.
Our new products became a success. So successful, in fact, that other shops and businesses have taken advantage of our branding and product reputation to try and use it to represent their products and/or services.
There are some companies, however, that do carry our products and install them for customers. We have formed relationships with some shops throughout the world that are called Preferred Installers. These companies are available to sell and install our products to their customers.
Browse EGR Cooler | Komatsu Products
More About Bullet Proof Diesel
So what does it truly mean - a Bullet Proof 6.0L?
A Bullet Proof 6.0L starts with getting educated on the 5 main pattern failures that occur with this engine. These pattern failures are:
- OEM Oil Cooler - The OEM oil cooler is a common source of failure. The small coolant pathways within the oil cooler can become plugged and this, in turn, can lead to failed EGR coolers as well as hot, thin engine oil. Our solution is the BulletProof Engine Oil Cooler
- OEM EGR Cooler - The OEM EGR Cooler is often blamed for being "the problem" on the 6.0L engine. While it is a common failure item, it often fails because of the plugged coolant pathways in the oil cooler. Understanding WHY this item fails is an important aspect to owning and operating one of these engines. Our solution is the BulletProof EGR Cooler
- Fuel Injection Control Module (FICM) Power Supply - The FICM is the electronic unit that controls the injectors on the 6.0L/VT365 engine. The FICM controls the injectors by sending 48V to the injectors at precisely the right time. Over time, however, the power supply built into this module can become tired and see the output voltage drop below the specified 48V. As this voltage drops, the performance of the injectors (and therefore the entire engine) will suffer. Upgrading this power supply with the Bullet Proof Diesel version is the only long-term path to reliability. Our solution is the BulletProof FICM Power Supply
- Head Studs - The 6.0L engine utilizes ten head bolts per cylinder head to affix the head to the engine. To help minimize blown head gaskets, companies such as American Racing Products (ARP) have developed head studs to replace the factory head bolts. For various engineering reasons, a head stud allows for a higher clamping force than a similar bolt does, thereby increasing the reliability by reducing the chance of a head gasket failure or stretched head bolt. We have complete head gasket kits available for you
- The OEM Water Pump - The OEM water pump comes equipped with a plastic impeller. The pattern failure observed on this water pump is that a crack can develop within the impeller, greatly decreasing the amount of engine coolant that the pump is able to move throughout the engine. Our solution is the BulletProof Water Pump
