RedHead 80-91 Chevy / GMC Trucks & SUV's Steering Gear (Threaded) | 2856 | 1980-1991 Chevy / GMC 1500, 2500, 3500, Blazer, Jimmy, Suburban 

Steering Gear Fits most 1980 – 1991 Chevy/GMC C-Series (2WD) Pickups and Blazers. This steering gear’s pitman arm is held on with a nut and washer. If you have a clamp style pitman arm, then you have our part number 2858. You can either order this gear and change your pitman arm or you can order the 2858. We do not have these pitman arms. If you have a 1988 to 1991 you need to determine which side of the frame your steering gear mounts on. This gear mounts on the outside of the frame. If your gear mounts on the inside of the frame then you want to order our part number 2864S. This gear only comes in the 15:1 ratio. If you would like the 18:1 ratio please order our part number 2856 4T.

Features:

• 12 Month Warranty
• Built in the USA
• Housings are machined out and replaced with needle bearings
• Shafts are flame sprayed or replaced as needed
• New control valves installed on some applications
• Worm and piston assembly are custom fit with special ordered, precise oversized ball bearings
• Sector shafts are installed on a lathe to confirm they are straight and true
• Sealing surface is polished to avoid any leaks

Core Return:

Please return core to: RedHead Steering Gears 4302 B ST NW AUBURN, WA 98001

• Please drain core of fluid and replace port plugs
• Use plastic bag that we sent your new gearbox in (if it’s still intact) or whatever is needed to keep box from leaking
• Re-use packing materials to ensure the box is returned to us without hassle from the courier
• Also, if possible, tape or re-tape the outside of the box to help strengthen it

Note:
If these steps aren’t properly performed, the gearbox may end up in hazmat and/or be returned to sender by courier.