Yukon Bearing Install Kit For 98 And Newer 10.5 Inch GM 14 Bolt Truck Yukon Gear & Axle

Yukon Bearing installation kits are perfect for shops and builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.
Details:

• Yukon Bearing install kit for 1998 and newer 10.5 inch GM 14 bolt truck differential
• Fits 1998 and up GM 10.5 inch 14 bolt truck
• Included are carrier bearings and races, Pinion Bearings and races, pinion seal, crush sleeve, pilot bearing, marking compound and brush
• 1 Year Warranty Against Manufacturer Defects
• Sold As A Kit

Fits Vehicles:

• Chevrolet Avalanche 2500 (2002 - 2006)
• Chevrolet C2500 3/4 Ton (2WD) (1999 - 2000)
• Chevrolet C3500 (1999 - 2002)
• Chevrolet Express Van 2500 3/4 Ton (1999 - 2015)
• Chevrolet Express Van 3500 1 Ton (1999 - 2015)
• Chevrolet Express Van 4500 (2009 - 2015)
• Chevrolet K20/K2500 3/4 Ton (4WD) (1999 - 2000)
• Chevrolet K30/ K3500 1 Ton (4WD) (1999 - 2000)
• Chevrolet P30 1 Ton Van (1999 - 2005)
• Chevrolet P3500 (1999 - 1999)
• Chevrolet Silverado 2500 3/4 Ton (1999 - 2015)
• Chevrolet Silverado HD 2500 3/4 Ton (1999 - 2015)
• Chevrolet Silverado HD 3500 1 Ton (2001 - 2013)
• Chevrolet Suburban 3/4 Ton (1999 - 2015)
• GMC C25/C2500 3/4 Ton (2WD) (1999 - 2000)
• GMC C35/C3500 1 Ton (2WD) (1999 - 2002)
• GMC K25/K2500 3/4 Ton (4WD) (1999 - 2000)
• GMC K35/K3500 1 Ton (4WD) (1999 - 2000)
• GMC Savana 2500 3/4 Ton (1999 - 2015)
• GMC Savana 3500 1 Ton (1999 - 2015)
• GMC Savanna 4500 (2009 - 2015)
• GMC Sierra 2500 3/4 Ton (1999 - 2015)
• GMC Sierra 2500 HD 3/4 Ton (1999 - 2015)
• GMC Suburban 3/4 Ton (1999 - 2000)
• GMC Yukon 2500 3/4 Ton (1999 - 2015)
• GMC Yukon XL 2500 3/4 Ton (2006 - 2015)