NEW Ford 7.3 & 6.0 Powerstroke ICP Sensor Socket | F6TZ9F838A | 1994-2010 Ford Powerstroke 7.3L / 6.0L

This socket was specifically designed to make the difficult task of replacing the ICP sensor on the early (up to 9/22/03) 6.0L Powerstroke a little easier. It also fits 7.3L ICP’s and 6.0L engine oil pressure sensors perfectly. This part carries a one year warranty.

Why?

On early built 6.0L Powerstroke diesels, the ICP sensor is located in an extremely confined area under the turbocharger. Attempting to change the sensor using a standard socket will either be a very difficult or impossible task because of the tight clearances involved. The 3/8th inch drive socket is designed to be as small as possible, both in length and diameter so that it will fit between the high pressure oil pump cover and the sensor and also allow as much clearance as possible at the end of the socket. Depending on user preference, the ICP sensor can be accessed either from above or below the truck.

Fitment:

• Early 6.0L Powerstroke ICP Sensor (up to 09/22/2003)
• 6.0L Engine Oil Pressure Sensor (2003-2010)
• 7.3L Powerstroke ICP Sensor (1994-2003)