PullRite 16K SuperGlide Sliding Fifth Wheel Hitch | PLR2714 | 2010-2019 Ford Powerstroke HD

The fully automatic, sliding #2714 OE Puck Series SuperGlide is designed specifically for Ford short bed trucks with pucks and is the ONLY automatic sliding hitch designed for factory fifth wheel mounts! This direct attachment hitch mounts directly to your truck's OE mounting points...NO ADAPTER RAILS NEEDED! SuperGlide is the only real solution to safely and efficiently regain that 90º turning capability. It's fully automatic, so there's no getting in and out of your truck to throw levers before and after turns like you have to do with other manual slide hitches. With 14" of slide during turns, the SuperGlide quickly moves your trailer away from your truck cab without you having to do a thing! No anticipation...just get in and drive! And SuperGlide is easy to remove without the need for tools. By easily removing the 40 lb. hitch head that is held in place with a couple pins and clips, then the remaining base is relatively lightweight. In fact, it is the second lightest among sliding hitches on the market and is made from high quality American steel.

The mounting post assemblies are completely removable for easier removal and installation of the hitch. Simply unpin handles, rotate 1/4 turn outward and lift the hitch out of the bed. NO TOOLS NEEDED! Premium hardware, like the use of castle nuts, allow for finer adjustments of the OE puck handles for ease of installation and fit! This SuperGlide is adjustable front-to-back to center it over the axle. Also, the hitch plate is your first connection to your trailer; ours have fully automatic locking jaw and the only self-locking handle on the market.

Features:

• 16,000 lbs. max gross trailer weight towing capacity
• 4,000 lbs. max trailer pin weight capacity
• 14" of fully automatic slide
• Direct mount, automatically sliding fifth wheel hitch for trucks with OE puck mounting points
• Dual articulating head moves side-to-side and front-to-back during towing for a smoother ride
• Hitch head easily removable with pins and clips...no tools needed
• Locking jaw closes automatically around king pin
• Latch handle locks automatically when locking jaws are engaged
• No secondary locking devices to engage means no reaching over high-sided truck beds to get dirty
• Extended handle keeps you out of the bed
• Precision, laser cut jaw components cradle the trailer's king pin 140º for a secure, tight fit
• Tight fitting parts give you the best ride possible
• Adjustable tension bolt prevents bumping or chucking
• A Capture Plate is required to activate the sliding cam arm
• Hitch comes fully assembled
• Hitch stands 17.5" to top of hitch plate
• SAE J2638 tested
• Made in the USA

Note:
The SuperGlide hitch for short box trucks is optimally designed for trailers with a King Pin located even with, or ahead of the leading edge of the trailer (measured at the corners of the trailer). It is the end users responsibility to ensure a safe towing experience. To this end, it is your responsibility to ensure that the truck, trailer, hitching components, and all other items involved are rated or have a capacity sufficient for the loads involved.