S&B Filters Cleaning & Oil Kit (Red Oil) | 88-0008

S&B Filter's cleaning and oil solution allows you to maximize the performance and longevity of your high performance air filter. This cleaning and oil kits will work on any S&B filter and on the vast majority of high performance filters in the marketplace. Periodically, you should clean your filter to remove any dirt build up by using the cleaning solution. The cleaning solution will also remove the oil previously applied to your filter. Once clean, simply apply the S&B oil to your filter. The easy to use aerosol can makes the oil application an easy process. The oil infiltrates the pleats of the filter and is suspended in the multiple cotton layers. Made in U.S.A.

3 Steps:

1. Remove & Clean
• Clean the sealing area and filter housing with a clean soft rag
• Tap the filter on a hard surface to remove any debris
• Use S&B’s Filter Cleaner to clean the filter
• Gently rinse out the cleaner using low pressure water
• Let filter dry for at least 24 hours
2. Fill & Apply
• Fill applicator with exact amount of oil required for your filter
• Starting 1/2 way from base make 2-3 passes around the circumference of the filter in the same area
• Repeat this process evenly spacing out the passes
3. Inspect & Install
• Allow oil to bleed for 20-30 minutes
• Inspect the filter for any white areas
• With the remaining oil in the applicator apply a small amount of oil to those white areas
• DO NOT over oil your filter