Calibrated Power Smarty Tuning w/ Hardware & Probe | CPTRANSPROBE | 2010+ Dodge Cummins 6.7L

This product includes tuning for the Smarty Hardware platforms that support UDC tuning. These include the Smarty Touch and the Smarty MM3. This tuning is not compatible with the older Smarty Platforms which are not equipped with micro SD cards. Custom tuning capability dramatically widened the performance and driveability when it first arrived on the Cummins market in 2011 with the advent of EFIlive for the 2006/07 5.9. Since then custom tuning platforms like EFIlive/HPTuners and Smarty have been racing to support as many electronically controlled Cummins trucks as possible. Where Smarty's UDC, MM3, and Touch platforms really shine is in their ability to bring very high level tuning support to all Cummins powered trucks from 1998.5 to present. On top of the that, with a direct J1939 connection to the 3-pin connector on the engine the driver is able to switch tunes in real time or allow the tuner to make real time adjustments in tuning (in a live tuning scenario). No other tuning platform on the market allows this level of versatility on the Cummins platforms.

Calibrated Power Solutions is dedicated to putting this cutting edge technology to use on your truck whether you're a remote customer or buying on-site at CPS. We develop all of our tuning on trucks that we own and maintain. Our tune development process involves hours and hours of testing on our in-house dyno along with thousands of miles of road use. We test the towing performance, cold weather performance, hone shift quality and minimize smoke output. After tuning performance diesel trucks for ten years we've developed very high standards for how a tuned truck should drive. The peak horsepower number is only a piece of the pie.

1998.5 -2002 VP44 Powered Rams

For years the VP44 trucks have been the red-headed stepchild of the electronic performance market. The normal recipe for power has some engine tuning, some pump interceptor module, and plenty of smoke and rattle. Using Smarty’s UDC software in tandem with our own in-house ECM mapping efforts we’ve got all of the tools to maximize pump out out (without tapping) beyond any other tuning product on the market. This tuning will easily push the stock transmission as far as it can go without putting your VP44 warrantee in jeopardy. When used in conjunction with a pump tap, not only can we get more fuel than other tuners but we can also control idle speed, timing, and smoke limitation to bring drivability up to never-seen-before levels. Trucks can switch between tunes on the fly as long as they MM3 hardware or the 3-pin J1939 plug adapter on the Smarty touch. Tune performance will change with aftermarket injectors/turbos etc. Contact your sales rep for specific output details on custom builds.

Product Includes: Base Optimized stock tune along with 4 performance tunes which can be switched on the fly

2003-2009 Common Rail 5.9L/6.7L Rams

CPS’s UDC tuning for 3rd generation common rail trucks offers the best in power and drivability for your 5.9L or 6.7L Cummins. It's as easy as changing your radio station. Imagine, going from 300 rwhp to 530 rwhp with the touch of a display (stock trans limit of 425rwhp recommended)! Switchable tunes come in two packages: One Geared toward stock transmission equipped trucks and one geared at trucks with built transmissions. Of course, further customization is possible as needed. Of course tune performance will change with aftermarket injectors/turbos etc. Contact your sales rep for specific output details on custom builds.

The 2003-2004 Standard Output (305HP) models and 2006-2007 DO NOT HAVE SWITCH ON THE FLY capability at this time.

2010-Present Common Rail 4th Gen 6.7L Rams

To get 500+RWHP out of your 6.7L Cummins, there's no need to pull your exhaust. We can get the power, mileage, and torque benefits of tuning that most other shops want to sacrifice your exhaust and any chance of your warranty for. At CPS, we specialize in engineering high power calibrations that work in harmony with the factory emissions control systems. Our calibrations process is time and labor intensive, but the results are worth it if you're using your truck daily and appreciate clean quiet operation.

Features:

• With our tuning the truck emits zero particulate (black smoke)
• Makes up to 500+ RWHP and 1100+ ft-lbs of torque
• Shifts firm and locks the torque converter to take advantage of the 6.7L's wide torque curve (*TCM tuning mandatory on 68rfe 500HP Tune)
• Improves mileage by wasting less energy in hydraulic torque converter operation
• Does not smoke on cold start
• Does not smell like diesel fuel
• Does not drone in the cab at any RPM while towing
• Does not make you a target for DOT and law enforcement
• Allows you to go back to stock with a simple reflash

The Jack tuning level offers 4 tunes ranging in power from 20HP over stock to 100HP over stock

• Tune 1 (+20HP 50ft-lbs): A tune designed for heavy towing use. Our goal with this tune is to give you as much extra power and torque as we can offer while keeping the powertrain safe for towing at max capacity. We calibrate around sustained EGT and torque converter clutch capacity.
• Tune 2 (+40HP 80ft-lbs): A tune designed for light towing use (8K lb trailer and lighter). Our goal with this tune is to give you as much extra power and torque as we can offer while keeping the powertrain safe for towing at light and medium capacity. We calibrate around sustained EGT and torque converter clutch capacity at these load levels.
• Tune 3 (+80HP 150 ft-lbs): A tune designed for daily driving, and great mileage. Our goal with this tune is to give you a tune that's fun drive unloaded every day. Improved throttle response, good low end feel and crisp shifts. We balance fun and mileage with long term driveline and emissions system reliability.
• Tune 4 (+100HP 180ft-lbs): A significant bump in power and torque. It feels like a totally different truck at this time. This tune will put you just shy of 450rwhp and 1000ft-lbs. We're talking about a truck that's a lot of fun to drive and a surprise for most anything you'll see at a stoplight. We reccomend not exceeding this power level for long term health on un-modified transmission or stock clutch (manual trans). See our King level tuning if you're prepared for 500+HP and a few transmission parts.

The King tuning level offers 4 tunes ranging in power from 40HP over stock to 160HP over stock

• Tune 1 (+40HP 80ft-lbs): A tune designed for heavy towing use. Our goal with this tune is to give you as much extra power and torque as we can offer while keeping the powertrain safe for towing at max capacity. We calibrate around sustained EGT of 1250*.
• Tune 2 (+60HP 120ft-lbs): A tune designed for light towing use (8K lb trailer and lighter). Our goal with this tune is to give you as much extra power and torque as we can offer while keeping the powertrain safe for towing at light and medium capacity. We calibrate around sustained EGT of 1250*.
• Tune 3 (+110HP 180 ft-lbs): A tune designed for daily driving, and great mileage. Our goal with this tune is to give you a tune that's fun drive unloaded every day. Improved throttle response, good low end feel and crisp shifts. We balance fun and mileage with long term driveline and emissions system reliability.
• Tune 4 (+160HP 300ft-lbs): Serious increase in power and torque. It feels like a totally different truck at this time. This tune will put you just over 500rwhp and 1100ft-lbs on a stock fuel system and turbocharger. We're talking about a truck that's a riot to drive and puts out zero smoke even at full tilt. To run this power level you'll need to add some hard parts to your transmission which will allow our TCM tuning to reach it's full potential.

Product Includes: Base Optimized stock tune along with 4 performance tunes which can be switched on the fly