PullRite ISR 20K SuperGlide Sliding Fifth Wheel Hitch | PLR2900 | Universal Fitment

The #2900 20K ISR Series SuperGlide is similar to the #2700 ISR SuperGlide, but with a heftier weight rating for pulling larger fifth wheel trailers. The hitch head and the cam arm mechanism for the #2900 is built with heavier components out of high quality American steel. Those parts are well equipped to handle the increased torque of a heavier trailer as the SuperGlide safely and quickly moves your trailer away from your truck cab during turns! When truck manufacturers decided to expand popular trucks' cab space and decreased the cab-to-axle distance in the bed, fifth wheel hitches that were originally designed to give you a 90º turn with an 8 ft. bed truck could not be used in the new short bed trucks and a solution was needed. SuperGlide is the only real solution to safely and efficiently regain that 90º turning capability. It's fully automatic, so there's no getting in and out of your truck to throw levers before and after turns like you have to do with other manual slide hitches. With 14" of slide during turns, the SuperGlide quickly moves your trailer away from your truck cab without you having to do a thing! No anticipation...just get in and drive!

SuperGlide is easy to remove without the need for tools. By easily removing the 40 lb. hitch head that is held in place with a couple pins and clips, then the remaining base is relatively lightweight...second lightest among sliding hitches on the market! If you already have a truck with industry standard rails, then you can easily replace your old fifth wheel hitch a SuperGlide (or Super 5th, or even our new SuperLite line of ISR hitches). Or if you’re not happy with your old rails, we invite you to upgrade to a stronger, high grade steel ISR Series rail system by PullRite. By swapping out your old fifth wheel hitch for a SuperGlide, with its fore-to-aft adjustable base feet, you can center your pivot point over the axle where it belongs for the best right possible with no bumping, chucking or sway. Most fifth wheels on the market today overlook this critical positioning over the axle and are mounted ahead of it. It’s a great upgrade with minimal cost.

Features:

• 20,000 lbs. max gross trailer weight towing capacity
• 5,000 lbs. max trailer pin weight capacity
• 14" of fully automatic slide
• Dual articulating head moves side-to-side and front-to-back during towing for a smoother ride
• Hitch head easily removable with pins and clips...no tools needed
• Locking jaw closes automatically around king pin
• Latch handle locks automatically when locking jaws are engaged
• No secondary locking devices to engage means no reaching over high-sided truck beds to get dirty
• Extended handle keeps you out of the bed
• Precision, laser cut jaw components cradle the trailer's king pin 140º for a secure, tight fit
• Tight fitting parts give you the best ride possible
• Adjustable tension bolt prevents bumping or chucking
• A Capture Plate is required to activate the sliding cam arm
• Hitch comes fully assembled
• Low profile feet are adjustable to center hitch over axle
• High profile feet available (#2708) for truck with high bed sides
• Hitch stands 18.5" to top of hitch plate
• SAE J2638 tested
• Made in the USA

Note:
It is the end users responsibility to ensure a safe towing experience. To this end, it is your responsibility to ensure that the truck, trailer, hitching components, and all other items involved are rated or have a capacity sufficient for the loads involved.

SuperLite King Pin Adapter and Remote Latch Handle included.